Electric disc feeding crusher

The power is transmitted to the pulley through the V-belt to drive the main shaft to rotate, causing the fixed disc of the movable disc to move relative to each other, thereby crushing the sample.

Category:

Disc feeding crusher

Send E-mail

Product Description

1. The disc crusher is mainly composed of a body, a base, a main shaft, a movable disc, a fixed disc, an end cover, and a hopper.

2. Characteristics: The power is transmitted to the pulley through the V-belt to drive the main shaft to rotate, causing the fixed disc of the movable disc to move relative to each other, thereby crushing the sample. The particle size of the discharged material can be controlled by adjusting the gap between the grinding disc through the size handwheel, main shaft, etc. The body, end cover, and upper cover form a working chamber, where material crushing is carried out. The material is added from the feeding port above the end cover and enters the middle of the two grinding discs. Due to the squeezing effect, the sample is crushed, and the crushed sample flows out from the gap between the two grinding discs. Drop into the hopper below. The principle of adjusting the mechanism is to release the large hand wheel, rotate the small hand wheel, and make the adjusting screw rotate to push the main shaft, making the movable disc move forward or backward. Thus, the gap between the two grinding discs was adjusted to achieve the purpose of adjusting the material particles.

Product Parameters

Model	Output (Φ8mm Screen, Straw) kg/h	Spindle Speed r/min	Hammer Quantity (Pieces)	Matching Power (KW)	Matching Stirring Cage	Disc Feed Port Diameter (mm)	Screen Width (mm)
50-80	2500	3440	34	45-55	Optional	Φ2150	795
50-100	3000	3440	42	55-75	Optional	Φ2250	995
50-120	3500	3440	50	75-90	Optional	Φ2400	1195
60-100	4000	3440	42	75-90	Optional	Φ2200	995
60-160	4500	3440	66	90-110	Optional	Φ2600	1595